Tag Archives: die cutting

Random Rambling Friday Wrap-Up

Is the month over?  It’s over – at least the work week, in oh, 3 1/2 hours.  Counting, definitely counting.  I was appointed to this case, and my, I am busy!

But that doesn’t mean I haven’t had time for this and that’s, right!

So, in no particular order

  • Passover fun was had by all!

img_0008

Ssshh!!!! I’ve already broken Passover . . . I just couldn’t take the matzah bloat anymore. I remember Moses, the desert, the boils and the locusts, I’m good. I got it, for six nights. Fini.

  • I may have made my last flipbook.  I think I’m over it.  I’m not sure.

img_0009

So, as I mentioned, I was spacing out my swaps, not over committing, so it wasn’t flipbook overload.  I think I’m just over it.  I don’t know.  I’m over the washi tape, that’s for sure.  Whoever called it tape didn’t really know what tapes’ function is.  I found myself adding layers and layers of washi to get the washi below it to stick.  The pages were actually pretty securely put together with hinges, and glue, but then I decorated with washi – and the decorative washi wouldn’t stick.  Oy!  In any event, this was a flip I made for a Paris swap through Facebook.  I bought the printable graphics on Etsy, and with them, I made journal cards, shaker gatefold flaps (with the fuse tool) (you can see them clipped together in the above photo – when you take the paperclip off, underneath is a pocket with goodies), and a snow globe!   Crazy!  I finally used my holiday card, snow globe die –

img_9882

I bought this die two years ago from Papertrey Ink, thinking I was going to make my own holiday cards, with Lemon and Olive in the snow globe.  That didn’t happen.  I don’t know why I thought Paris and snow globe, but it clicked, and I think it turned out cute.  I was in such a creating frenzy, though, I didn’t think to photograph the process until I was all done.  So, basically what you do is use the outline die to create a base.  Then, you cut the top of the shaker out of decorative paper, and sticky foam.  You then layer the base, your sprinkles, the foam, a clear circle vellum/plastic window, and then the top – voila! A shaker globe.  For whatever reason, my sprinkle stuff got caught in my sticky foam, so it doesn’t really really shake, what can you do.  Be more careful I guess.  But, I wasn’t about to rip it open and make another.  And for sprinkles – see that circle die?  It makes snowflakes, and confetti  – pretty cool!

img_9887

Now that I’m thinking about it, and rambling along, I think that my “over it” feeling about flipbooks is that I’d rather make them for someone who I’m regularly corresponding with then a one-time swap with a passing stranger. I feel like this is something I’d want to make for a penpal after we’ve exchanged a few letters, and I was making something for someone I kind of ‘knew.”  Too bad I unceremoniously abandoned all of my penpals after my father died, and my Wendori was lost forever.

I did make one more, that I didn’t photograph, for a swap on swap-bot, and I enjoyed it more because it was an offshoot from another swap wherein the person had asked me to write back, and I felt like the “project” was more of an elaborate envelope than this humungous thing:

img_9896

All said and done, between the cover, and the flaps, I decorated 10 pages, filled a bunch of pockets, and spent many nights after work assembling, fusing, die cutting and tweaking.  The ‘elaborate envelope” was like this, made from one sheet of 12 x 12 paper, with flaps made from simple, creative cutting.  This little, hour long project, was fun, and relaxing, and I can see more of these in the future.  The ten page, humungous flipmonster – not so much.

  • I investigated, and bought a new planner.  In my last post of last year, I mentioned that I had my MIL buy me a faux Midori Traveler’s notebook online from an Etsy seller, Dokkipaper, for Hanukkah. planner1I remain supremely happy with my present, the leather just keeps getting softer, and a bit more scuffed with loved.   But the calendar insert that I printed for myself is set to run out in June, and I have to decide where my planning is going next.  So, I fell down the crazy, deep internet whirlhole of planner communities.  At first, I was seduced by the Happy Planner, and joined a half dozen Happy Planner Facebook groups, without actually buying said planner.  After a few weeks of watching everyone sticker up their months, days and weeks, I decided that wasn’t for me.  I also became less transfixed with the Arc system of rings – it seemed hard to flip the paper, and heavy, really heavy.  So, I unjoined all of those groups, and joined Christy Tomlinson’s Planner Society FB group, because while almost everyone is subscribed to her Planner Kit Club, everyone is in a different planner.  I then became enamored with the Kikki K’s, the big ones, the A5 size.  Hmm, do I really want that big thing, I thought, and if I do, do I really want it for planning?  I mean, that’s a big thing to whip out in court and check a date.  So, I did some soul searching, and realized, yeah, I am supremely happy with my TN, why would I change?  I must be yearning for something else.  And, that something else, I concluded was more of a memory keeping journal, to help me along with my Project Life, and to be more of a daily journal/diary.  In my original post about my TN, I mentioned that one of my inserts was a “Morning Pages” booklet.  Er, that didn’t last long.  And, since I had pasted a copy of the sentencing guidelines (because everyone has that in their planner!) in the back of my calendar, I had started leaving it out on courtroom tables, and I became concerned that I might lose it a la the Wendori, and then my morning thoughts would be out there for everyone – what thoughts they were, I wasn’t exactly a daily journaler.  So, the solution, it seems is to have a planner, my TN with a new calendar insert, and a big thing I can keep at home, beside my t.v. chair, to update daily.

So, I wistfully looked at everyone’s pretty Kikki K’s, and could not bring myself to spend that much money ($90+ shipping) on a planner, even a pretty planner.  So, deciding to plan within my means, I begin investigating the Webster’s Pages Color Crush Planners, which right now are on super sale on Blitsy (with the Mother’s Day coupon code).  They’re similar to the Kikki K’s, but faux leather, and not quite a true A5 size.  But, there was just something about them that I didn’t like.  Well not just something, the guts of it – the inserts.  First, the calendars are dated, so I’d have already lost nearly half the year.  And second, it has a snap closure.  I want to punch holes into things and stick it in my memory planner, and I don’t want to be constrained by a snap.  So, while I had an A5 Color Crush planner in my basket on the Blitsy site, and post coupon, it was only $42.95 with shipping, I couldn’t hit the commit button.  Instead, I got sucked into the youtube planner channels, and after not careful, but “I want that” consideration, I decided to go with the Heidi Swapp Memory Planner.

There it was – right in it’s name – the memory planner.  Exactly what I was looking for.  A kind of planner, a kind of abbreviated scrapbook, a kind of journal.  That’s the right planner, I thought.  So, that’s the “I want it” part – the careful part – well, I threw careful to the wind.  The online reviews of the planner aren’t so good – that the holes all have to be repunched because they were punched too small, that the binder feels cheap, etc.  But, you get what you pay for, and after my 40% off coupon at Michael’s, and a free shipping code that Michael’s gave me after I left the planner sitting in the cart overnight (so smart of them! push me over the edge into purchasing with a shipping code!), it was only $20.  So, I reasoned, if the binder is crap (and all of the warning signs are there that it just might be), I can always put the inserts, which, along with the photo sleeve inserts are the reason I was buying the thing anyway, into another binder, like this one from Dokkipaper, a kind of faux Kikki K, faux Dokibook, which is also snapless.  ah, but you may say, how will you do that because Heidi Swapp’s isn’t really A5, and it has only 4 holes.  Solved that one – I’ve already seen someone on the Planner Society FB group punch the extra two holes, and put it in a traditional A5 planner, so I think I’ll be good.  So, for now, I’ll try out the cheap binder, and see how it goes – and I’ll let you know.

All of that rambling has left my exhausted, like poor little Olive after playing with her ball outside all day, and then scarfing down her dinner.

img_9879

Definitely a hard life for the little Boston!

Have a great weekend!

Basic CMYK

 

Playing with the We R Memory Keepers Fuse Tool

As I mentioned on Friday, I got suckered by a half price offer – an offer, apparently, I couldn’t refuse, and even though in my head, I’m walking back the tools, the products, the photos, I bought the We R Memory Keepers Fuse Tool.   For those of you who have never seen this product, the fuse tool is like a wood burner but for plastic – the tip melts the plastic, creating a seal, and ta da – your own pockets, shaker cards, and whatever else your heart dreams of in plastic.  It comes with this flimsy stand, the cattle prod looking thing, a ruler and two tips – a sealer and a cutter.  The cutter apparently seals and cuts at the same time, and I suppose it’s good for cutting out shapes, or pocket tops, but I haven’t had a chance to use it yet.

So, here’s the new guy, all plugged in and ready to go.  The instructions say to let it heat up a good ten minutes, so while I waited, I mulled what I was going to make. Because, the truth is, I don’t really need any custom pockets, or shaker cards, or anything else – but I have it, so I’m going to use it.
img_8950-3

Because I don’t do any traditional scrapbooking, or cardmarking, or anything for which I’d need a sequin, I don’t really have anything to fill a shaker pocket – hadn’t thought of that.  Luckily, I do have this sequin die that I bought a few years ago from Papertrey Ink when I had grandiose dreams of making my own snow globe, shaker card holiday cards.  Didn’t happen.  So, I finally took the die out of the package, and made some sequins.  This die actually fits in the itty bitty machine I talked about on Friday, real name Diamond Press, available only at HSN until June, I think.  I also think itty bitty machine is a better name, but what would I know.

img_8949

Sequins made, I put them in a pocket with some acrylic stars and a camera, probably from a Studio Calico kit that I could never figure out what to do with since I don’t make shaker cards, and voila, a shaker pocket!

img_8951-1

As you can see, my seal line isn’t so straight, and it’s a little gloppy.  Basically, you run the tool, which has a roller tip, against the ruler.  Naturally, I went too fast, and went a little rogue, but it worked – it’s sealed.  Unfortunately, once it was done, I didn’t really have any use for it, and I found that one of the other pockets was defective.  No matter, I cut it open, and reused the acrylic embellishments.

Not having any need for any shaker pockets in my current PL week, I went back and found this pre-Fuse insert I made for my parent’s 50th Anniversary Party, because I couldn’t just be done with one pocket that I ended up destroying.

img_8999-1

Definitely sloppy enough to justify a redo.  So, I took a 12 x 12 page, and laid out my candy bar wrapper, and found it was wider than the invitation.  So, I made little pockets on each side to fill with sequins.  Oh yeah, I don’t have any sequins, so I again endeavored to make my own.  This time, I used cards from a frankly crappy Heidi Swapp gold foil filled PL Value Kit, and went to town with my sequin die –

img_8985-2

Glad to use that gold foil for something.  I’m also a sucker for a Michael’s clearance bin sale.

img_8993

Yep, so much better than the original, washi tape engineered original insert.  As you can see above, I did miss a little spot with the roller tip right above the word anniversary on the chocolate bar wrapper, but after I took the photo I spotted it, and fixed it.  One thing I learned is that if you can use the ruler that came with the kit, you should.  While it’s short, and doesn’t stretch across a 12 x 12 page, it is heavy, and does a good job of pressing down whatever is inside your pocket, ensuring that you have plastic pressed to plastic – because if there’s even a little air in between, and the pages aren’t touching, you aren’t going to be able to melt them together.

Here’s a closer look at the seal –

img_8992

And, here it is in the album:

img_8991

Had I been thinking, instead of just gleefully melting full steam ahead, I would have thought of the other side of the insert.  The invitation has a nice pattern on the other side, so that’s ok, but the other side of the candy bar is upside down – I probably would have cut the wrapper, and turned the other side around, but eh, whatever.

Feeling like a super fuse expert, I then went back to April 2014, and made this insert for my niece’s birth announcement:

img_8990-1

Now, even though my 2014 album is finished through July, I hadn’t included this back in April because my sister-in-law sent them out probably in June, and I was long done with April.  But, I had it saved in a box of stuff anyway, so now seemed like a good time to make an insert – I have a new tool to play with dammit!  So, again, I started with a 12 x 12 page protector.  I fused along the side of the invite first, cut off the excess, filled the bottom with stuff, and then fused a line across.  The first time I made this pocket – yep, first time fail – I made the line way too high – and I thought, no matter, so the top shaker will be narrower, no biggie.  But, the problem was that I hadn’t really put enough stuff in the pocket, and it turned out really top heavy.  So, I tried to poke a hole in the bottom of the pocket with a craft knife, so that I could shove some more stuff in, but I ripped the whole thing open and had to start again.  Oh well.

And, if you’re wondering where I got all of those sequins and baby like die cuts, when I just finished saying I don’t really have anything like that in my stash – well, those little “goodies” came in the birth announcement.  And, since I didn’t know they were loose, just shoved in the bottom of the envelope, when I pulled out the announcement – Bam! They went flying in my face, on the hall table, on the floor, everywhere.  WHO DOES THAT!!!!!  It’s not a party in an envelope – it’s a mess in my foyer! Cardmaking friends – please never do that.  It was such a mess.  I was finding random sequins in my foyer for months.  Shaker cards, cardmaking friends, not loose in the envelope.  I know none of you do that, anyway.  Because no one would do that, except for  . . .

Ehem.

Anyway, after playing with the Fuse for a few hours, here are my thoughts:

  • I can see myself using this tool a lot for inserts, and very infrequently for making actually shaker pockets on the Design A page.  Since I try to keep up, week to week, I don’t think I want to commit to how the pocket will be used in the next week – what if I NEED that space!
  • While I am trying to be more selective with my photos, I will definitely use this tool for making pocket flaps to add more photos, or perhaps to add an interactive element to hide journaling, or something like that.
  • As for the tool itself – it’s easy peasy to use – plug it in and it’s ready to go in about 10 minutes.   Forget about the stand though, and get yourself a ceramic mug, then you don’t have to worry about it flopping around and burning yourself.  And, instead of a glass mat to protect your surface, I have a ceramic tile that I bought at Home Deport for about $5 when I was going through a soldering phase.  Works great!

So, if you’re thinking about buying this product – don’t pay full price.  I don’t think it’s necessarily worth $30 – I paid $15 plus shipping.   Use a Michael’s coupon, or get the bundle at HSN – for $15 over the retail price, you get a ton of stuff – plastic sleeves for waterfall pages, the extra fancy tips, fusible paper!  This clearance price is a steal, and I wish I had seen it first.  Drat.  And, even though I bought the itty bitty machine on HSN (I am a total sucker for the show stopper on Craft Day!), I don’t work for HSN or anything like that – no monetizing on this blog with ye ol’ 11 subscribers.  I just think it’s a good deal, and I’m always happy to enable -er share!

And, I guess if I ever get tired of making pockets with it, I could always use it instead of my foodsaver machine.  Happy melting everyone!

Basic CMYK